PC/104 Enclosure

Warning! QuickMenu may have been blocked by IE-SP2's active content option. This browser feature blocks JavaScript from running locally on your computer.

This warning will not display once the menu is on-line. To enable the menu locally, click the yellow bar above, and select "Allow Blocked Content".

To permanently enable active content locally...

1: Select 'Tools' --> 'Internet Options' from the IE menu.
2: Click the 'Advanced' tab.
3: Check the 2nd option under 'Security' in the tree (Allow active content to run in files on my computer.)

Single Board Computers, PC/104
( PC104 ), PC/104-Plus,
& STD Bus Products

Tuesday, February 09, 2010

About Us | Contact Us | News | Careers | Support

ENC-104
PC/104 Enclosure

SPECIFICATIONS

Enclosure

Accepts PC/104 and PC/104-Plus modules
Up to 4 modules can be mounted inside
Slotted cable exits for flexibility
User configurable or standard end plates
Slotted keyholes for easy mounting
Vented side walls for heat dissipation
40W power supply available (optional)

Construction

Light-weight Aluminum construction
Black Powder Coat finish
Dimensions: 7.125"W x 8.325"D x 4.0"H

Datasheet | Manual

OVERVIEW

The ENC-104 is a simple, low-cost enclosure for PC/104 systems. The enclosure allows a designer to package a variety of system configurations quickly and easily to take full advantage of the reliability, small size and low power of PC/104 and PC/104-Plus modules. Typical mounting is in a NEMA box, wiring closet, equipment room, and other areas where it is necessary to protect a PC/104 module stack.

The interior of the enclosure is large enough to install any PC/104 module, even those with latching I/O connectors. The additional room also simplifies cable routing plus supports service loops to connectors mounted on the end panels.

WinSystems reserves the right to make changes to products and/or documentation without further notification. Product names of other companies may be trademarks of their respective companies.

ORDERING INFORMATION

Product Model
Part Number	Description
ENC-104-10	Enclosure with (1) Slotted pass-thru end plate and (1) Blank end plate
ENC-104-11	Enclosure with (2) Slotted pass-thru end plates
ENC-104-12	Enclosure with (1) Slotted pass-thru end plate and (1) Standard I/O connector end plate
ENC-104-13	Enclosure with (1) Slotted pass-thru end plate and (1) PS40 Power Supply
ENC-104-14	Enclosure with (1) Slotted pass-thru end plate and (1) Terminal strip end plate
ENC-104-23	Enclosure with (1) Standard I/O connector end plate and (1) PS40 Power Supply
ENC-104-24	Enclosure with (1) Standard I/O connector end plate and (1) Terminal strip end plate
Part Numbering Method
ENC-104-XX
0 = Blank end plate
1 = Slotted pass-thru end plate
2 = Standard I/O connector end plate
3 = PS40 Power Supply
4 = Terminal strip end plate