PPM-DC-ATX-P

Description

The PPM-DC-ATX-P is a PC104-Plus module that produces five regulated DC voltages from a common DC input. It features a very wide voltage input range from 10 to 50 volts. This allows the unit to operate with 12, 24, or 48 volt battery or distributed DC power systems.

PRODUCT MANUAL
DATA SHEET
PRODUCT INFO

Features

  • Wide input range: 10V to 50 VDC
  • Voltage output: +5V @ 10A, +3.3V @ 10A, +12V @ 3A, -12V @ 800 mA, and +5VSB @ 2A
  • PWR_OK, PS_ON#, and +5VSB supported for power management and sleep modes
  • -40 to +85°C operation
  • No fan or heat sink required
  • No minimum load required for regulation
  • Outputs with short circuit, overload and overvoltage protection
  • Screw terminals for accessory power connection
  • High efficiency design
  • Fast transient response
Features
Power Supply Module

PC/104-Plus ATX DC/DC power supply
No fan or heat sink required
Screw terminals for accessory power connection
Remote enable supported
Sleep and power management supported
Input Voltage

Wide range: 10-50 VDC
Output Voltage

+5V @ 10A
+5VSB @ 2A
+3.3V @ 10A
+12V @ 3A
-12V @ 800 mA
Over current protection (OCP) and over voltage protection (OVP) for all outputs
High efficiency
Fast transient response
Low voltage ripple
No minimum load required for regulation
Bus Expansion

PC/104-Plus
PC/104
Mechanical

PC/104-Plus-compliant
Dimensions: 3.6 x 3.8 inches (90 x 96 mm)
Weight: 4.5 oz (127g)
Operating Temperature Range

-40°C to 85°C

LATEST PRODUCTS: